• 20Hz ~ 1MHz wide test frequency
• 6 digit measurement resolution
• 10mV ~ 2V measurement drive level (DC/20Hz~3MHz)
• 0.1% basic measurement accuracy
• Fixture trimming, open and closed connection
• Graph mode for visual representation of measurement data

The LCR-8000G Series is designed to perform precision impedance measurements over a wide frequency range of 20Hz~10MHz for LCR-8110G, 20Hz~5MHz for LCR-8105G and 20Hz~1MHz for LCR-8101G. The instrument is capable of measuring 11 different parameters with0.1% basic accuracy, which meets the precision measurement requirements of components and modules used in the RF circuits. The large LCD display with a single-layer operation menu of LCR-8000G Series provides users with the ultimate convenience to plug and play without much learning time.

The Multi-Step mode is capable of running a series of measurements of a component at a number of user-defined steps in sequence automatically. A total of 64 programs can be saved into the non-volatile memory, and each program contains up to 30 test steps. The parameter and Hi/Lo limits can be set respectively for each test step. After a program is properly edited, the instrument can run through all the measurement steps either at a press of the button under the Manual Trigger selection or automatically run the program by detecting the connection of a DUT under the Auto Trigger selection. When all the test steps are completed, the screen shows the measurement reading of the parameter being selected for each step with Pass, HI, or LO measurement result.

The graph function shows the component characteristics in a visual manner. Either voltage sweep or frequency sweep can be selected for a horizontal scale. Just select the parameter, and set the start/stop voltage or the start/stop frequency of the sweep, LCR-8000G will run through the sequence of measurements and show the results on a graph. This graphical parameter measurement performs the characteristic verification of components and materials over the response to the changes in AC test frequency or AC test voltage without the need for complex programming of an external controller. When the graph gets out of the vertical range, the LCR-8000G Series can automatically adjust the scale to get full test information. On the graph, the marker operation is available for detailed observation.