HT Instruments LineSplitter - Conductor Splitter Without Cable Stripping, 120V

Conductor Splitter Without Cable Stripping

Conductor splitting without cable stripping
Mains voltage (L-N, L-PE, N-PE)
Leakage current on protective conductor
Measurement of leakage current under RCD mode (L-N)
Phase current
10X magnified phase current

View Product Details

Your Price: $49.00

In Stock:

Free shipping over $99
View Payment Options

Request Quote

Description

HT Instruments LineSplitter - Conductor Splitter Without Cable Stripping

Conductor Splitter Without Cable Stripping
Standard measurement section and a x10 multiplier section for use with higher ranged clamp meters
Used to make voltage checks safely with standard multimeter probes

LINESPLITTER was designed by HT to carry out splitting among active Phase, Neutral and PE conductors on single-phase installations powered by 2- or 3-pole cord cables up to 16A absorption. You will be able to take immediate measurements of current by means of clamps/DMMs which would be otherwise impossible without stripping the cable to get access to individual conductors .

This unit is is powered by 120V mains supply through built-in shuko plug. LINESPLITTER complies with IEC/EN61010-1 standards for electronic equipment. It can be used for CURRENT and AC VOLTAGE measurements on CAT II 120V earthed installations with max load current of 15A.

Ergonomics

The line splitter has connection wires to the wall and the device under test to eliminate stresses on the wall outlet and provide easy access for measuring instruments. The only splitter that measures leakage current from either the "Line to Neutral" or "Line to Ground".

Manuals/Guides

Manufacturer Specs

Technical Specifications
Mechanical
Dimensions (L x W x H):	210 x 60 x 35mm
Weight:	385g
General
Ax1 ring current:	AC current on L conductor direct measurement
Ax10 ring current:	x10 multiplier for low AC current measurement
mA L-N ring current:	indirect/differential leakage current on L-N conductors
mA PE ring current:	direct leakage current on PE conductor
V-N-PE sockets:	V-N and V-PE voltage measurements
Power supply
Main supply:	120V
Main connection:	NEMA plug, 50cm length
Load connection:	NEMA plug
Max load current:	15A
Safety:	IEC/EN61010-1, IEC/EN61010-02-030
Measurement category :	CAT II 120V
Max operating altitude:	2000m
Environmental conditions
Operating temperature/humidity:	-20°C ÷ 40 °C / <80%RH
Storage temperature/humidity:	-20°C ÷ 60°C / <80%RH